Currency Shrink wrapping Machine – Model: ANSW-02

• Mounting- Desktop
• Shrink Method- Tunnel Type
• Control Architecture- Electronic System. Intelligent Microcontroller based architecture with Solid State relays for efficient control of the entire system.
• Shrink Output- 300 bundles per hour.
• Transport Speed

– In terms of Meter per Sec : 0.1 Meter / Sec { This is the speed of the conveyor}

– In terms of total shrink wrap throughout : 3 bundles in 6 second { Since the tunnel length accommodates this result }

• Display

Seven Segment display to indicate the stages of Shrink Wrapping Process

LCD display with backlight ( 4 lines of 20 characters each):

– To display count of bundles shrink wrapped for the day/period

– To display User-interface messages.

• Keyboard – User-friendly keyboard having 8 keys to accept input from the user during operation
• Electrical Protection- Main circuit breaker is built into the system

• Bundle Detect Sensors- Sensors are present in the input side as well as output side to track the movement of currency bundle. These sensors provide inputs to the system for managing the power supply requirement as well as provide security to the bundle by controlling the heaters.

• Tunnel Material – Stainless Steel (SS )
• Conveyor Motor – 24 V Heavy Duty DC Motor
• Conveyor Belt- Teflon conveyor (which can sustain high temperature tolerance) with mesh surface for efficient heat distribution in the tunnel
• Rollers- Silicon coated rollers.
• Blower Motor – Heavy duty continuous supply type blower motor with fan blades for uniform distribution of heat in the tunnel.
• Heater Type- Filament based heavy duty air heater
• Tunnel Window dimension (LxH in mm) – 190 x 220 . Currency bundles can easily pass through this tunnel window.
• Tunnel length – 520 mm
• Overall machine dimensions -(LxBXH in mm) 750 x 400 X 570

• Overall machine dimensions including service clearance -(LxBXH in mm)- 1050x 500 X 650

• Net weight – approx 60 kg

• Software advantages

-Bundle Jam Detection and Automatic system control

-Efficient power consumption management during standby period

-Counter facility to detect the total bundles shrink wrapped

-Dynamic Temperature Indication during the system operation.

• Electrical protection – Main circuit breaker is built into the system
• Heat transfer control – Systems wall is insulated by special material which will minimize the transfer of tunnel temperature to the cabinet.
• Temperature control – System has got dual temperature control mechanism. It utilizes Digital and Analogue temperature controller to maintain the tunnel temperature within the shrink wrap limit.
• Bundle removal during power failure – In order to remove the bundles struck inside the tunnel, the machine contains a lever mechanism, which can be manually rotated with greater ease to move the conveyor for taking the currency out of the tunnel.

• Input Supply- 230 V AC @ 50 Hz , Single Phase
• Power Requirement { Peak Power Requirement} – Not more than 2.6 KVA
• Average Power Consumption- 1.2 KVA { Estimated kwH : 1.2 units }
• Power Socket required-15 Amp Socket -Power cable must be of type 16 SWG
• Heater Type- Compact spiral high density heater

• Noise Level- Less than 40 Decibels (dBA) / Noise
• Relative Humidity – Environmental limitation for relative humidity is minimum 15 % and maximum 85%
• Ambient Temperature- Environmental limitation for Ambient Temperature in degree Celsius is minimum 16 and maximum 45.
• Temperature norms – Environment Temperature during System operation: 30 Degree Celsius (When air conditioner is not Present)
• System Operating Temperature: 112 Degree Celsius inside the tunnel.
• Temperature leakage to outside world is suppressed by using heat blocking insulators inside the tunnel surface.